CORPORATE
SAES
    Main Navigation

Gas Purifiers

    Nitrogen
    Hydrogen
    Ammonia
    CDA (Clean Dry Air)
    Helium
    Argon
    Oxygen
    Carbon Dioxide
    Other Gases
Products
Home » Products » Gas Purifiers » PS7-Adsorber-and-Getter-Beds
Email Email this page » Email Print this page »

Hydrogen Bulk Gas Purifier - PS7-H - Adsorber and Getter Beds

PS7 GETTER AND ADSORBER HYDROGEN PURIFIER

The Hydrogen MegaTorr Adsorber and Getter Purifiers utilize a combination of heated getter and ambient catalytic-adsorption processes to provide ultra-high purity Hydrogen gas. Outlet impurity levels for O2, CO, CO2, H2O, CH4, NMHC, and N2 are reduced to low parts per billion (ppb) levels.

Two ambient temperature adsorber vessels removes O2, CO, CO2 and H2O while the downstream getter vessel, operated at an elevated temperature, eliminates N2 and CH4. The two adsorber vessels alternate between purify and regeneration mode providing continuous purification. Adsorber regeneration is accomplished by backflushing with purified hydrogen at elevated temperatures.

Standard Features

  • Automated Microprocessor Controller
  • CRT Touchscreen Operator Interface
  • Password Protected Control System
  • System Alarms
  • Temperature Interlocks
  • N2 Purged Secondary Enclosure
  • H2 Leak Detection Sensor
  • Vented Cabinet Purge
  • Over Pressurization Safety Relief System
  • Electric Gas Preheater
  • Dual Closed-Loop Temperature Controls
  • Redundant Heating Elements
  • Pressure Transducers
  • Battery Back-up
  • Back-up Pneumatics Reservoir
  • Water Cooled Heat Exchanger
  • All Metal Enclosure With Doors

Customer Interface Connections

  • Alarm Relay - fail safe relay contacts allow remote detection of alarm condition.
  • Remote Contact Shutdown - allows remote shutdown of the purifier.
  • Mass Flow Meter & Totalizer 4-20mA - Available when MFM is specified.

Optional Features

  • Mass flow meter with 4-20mA Output
  • Internal Auto Bypass
  • Separate Control Power
  • UPS - Uninterruptible Power Supply

 

PS7 Adsorber and Getter - Performance
Gas Purified Impurities Removed Outlet Performance
H2 H2O, O2, CO, CO2, N2, NMHC < 1 ppb
CH4 < 10 ppb (at factory), <1 ppb (on-site)
Note: Purifiers are gas specific and should only be used for the gas indicated.
Purifier Lifetime Information
PS7 Adsorber and Getter - Specifications
Model Maximum Flow
(Nm3/hr)
Average Power
Consumption (kW)
Maximum Pressure
Drop (bar)
Dimensions (cm) Weight
(kg)
H W D
 PS7-MGT20-H  20 4  0.7 205 161 120  862
 PS7-MGT40-H  40 8 1 205 161 120  862
 PS7-MGT100-H  100  22 1.2 213 134 164  1361

 

For outdoor installation see our outdoor enclosure options (OPAL)
Factory regenerable bulk gas purifiers, PS14

PS7 GETTER AND ADSORBER HYDROGEN PURIFIER

PS7-MGT50-H

Applications

  • » Semiconductor
  • » LED
  • » Flat Panel Display
  • » Research
  • » Emerging Industries
  • » Industrial

Products

  • » Gas Purifiers
  • » Purifier Selection
  • » AMC Certification

Technical Support

  • » Contact Tech Support
  • » Purifier Regeneration
SAES
©2017 SAES Pure Gas, Inc. All rights reserved.
Site Map || Contact Us